72V & 80V: Brake Pad Bedding

72V & 80V: Brake Pad Bedding

Walks through the step-by-step bedding process for new brake pads and rotors, including rotor cleaning, moderate and hard braking cycles, cooldown procedures, and common mistakes to avoid.

September 14, 2026 · 5 min · 850 words · John Angel
72V & 80V: Motor Heat Limits and Magnet Damage

72V & 80V: Motor Heat Limits and Magnet Damage

A practical guide to QS and Sotion motor temperatures, N35SH magnet ratings, high-temperature operation, controller protection, Statorade, Hubsinks, and water cooling.

September 13, 2026 · 8 min · 1669 words · John Angel
72V: 41Ah Battery Balance Lead Failure

72V: 41Ah Battery Balance Lead Failure

One owner’s 41Ah battery showed extreme cell group readings that changed when the pack moved. His video revealed a disconnected balance lead, illustrating why a physical connection fault can look like severe imbalance.

September 11, 2026 · 5 min · 1018 words · John Angel
72V: Battery and Cell Voltage

72V: Battery and Cell Voltage

Interpret voltage in the context of battery model, load, and BMS readings rather than relying only on the percentage display.

September 10, 2026 · 3 min · 460 words · John Angel
72V: Cleaning and Corrosion Prevention

72V: Cleaning and Corrosion Prevention

Explains how to maintain ONYX surfaces and hardware over time, including aluminum, wood, and steel care, correct washing techniques, and long-term corrosion prevention.

September 9, 2026 · 4 min · 696 words · John Angel
72V: CT-22 Display Controls

72V: CT-22 Display Controls

Operate the display and identify the next check, with detailed wiring and parameter setup in their own references.

September 8, 2026 · 6 min · 1261 words · John Angel
72V: Hardware and Torque Specifications

72V: Hardware and Torque Specifications

Look up hardware by assembly and keep axle and locking-method differences visible when the original references disagree.

September 7, 2026 · 3 min · 623 words · John Angel
72V: High-Current Battery Design

72V: High-Current Battery Design

Explains why voltage and capacity alone do not establish usable output, with recorded design targets kept distinct from proven pack performance.

September 6, 2026 · 12 min · 2500 words · John Angel
72V: JAWS Mode Controller Parameters

72V: JAWS Mode Controller Parameters

Explains core controller behavior and configuration dependencies, with focused companion articles for ratios, braking, measurements, and throttle diagnosis.

September 5, 2026 · 26 min · 5372 words · John Angel
72V: JAWS Mode Settings

72V: JAWS Mode Settings

A full reference of the JAWS MODE FarDriver tune with exact parameter tables covering base setup, advanced controller configuration, throttle calibration, field weakening curves, regen mapping, gear ratios, protection systems, and display settings.

September 4, 2026 · 5 min · 1026 words · John Angel
72V: Kelly Controller Faults and Diagnostics

72V: Kelly Controller Faults and Diagnostics

Explains how to diagnose and resolve issues on the 72V ONYX Kelly controller, combining calibration procedures, fault codes, thermal behavior, and controller logic into a real-world diagnostic system.

September 3, 2026 · 4 min · 834 words · John Angel
72V: Specifications

72V: Specifications

Use the 72V reference alongside separate battery, motor, torque, wiring, and service articles.

September 2, 2026 · 4 min · 721 words · John Angel