Use the stock control assembly where possible. For an aftermarket replacement, identify each function and verify the mapping on the actual assembly; the two documented examples are not interchangeable pinouts.
Left Handlebar Controls (72V Wiring Reference)
When replacing or upgrading the left handlebar controls on the 72V ONYX platform, the stock ONYX RCR control assembly should be used whenever possible.
Aftermarket controls can be used, but wire mapping must be verified and corrected. Incorrect pinout will result in non-functioning lights, turn signals, or horn behavior.
Function Overview
- High beam switch uses a dual-position circuit
- Turn signal uses a 3-position switch (left / neutral / right)
- Horn is momentary
- USB circuit (if present) is independent power
Aftermarket Control Mapping #1
| Function | Postion | Stock Wire | Aftermarket Wire |
|---|---|---|---|
| High Beam | On | White | Yellow |
| High Beam | Off | Grey | Black |
| Turn Signal | Left | Green | Green |
| Turn Signal | Neutral | Red | Blue |
| Turn Signal | Right | Blue | Red |
| Horn | On | Yellow | Pink |
| Horn | Off | Brown | Brown |
| USB | (+) | Purple | None |
| USB | (-) | Black | None |
Aftermarket Control Mapping #2
| Function | Postion | Stock Wire | Aftermarket Wire |
|---|---|---|---|
| High Beam | On | White | Yellow |
| High Beam | Off | Grey | Yellow |
| Turn Signal | Left | Green | Black |
| Turn Signal | Neutral | Red | Red |
| Turn Signal | Right | Blue | Green |
| Horn | On | Yellow | Yellow |
| Horn | Off | Brown | Yellow |
| USB | (+) | Purple | None |
| USB | (-) | Black | None |