Credit: ONYX Community

Searching for ONYX Parts and Tools

Tap the arrow above next to “Table of Contents” to view the ONYX parts list, then select the specific part you’re searching for.

ONYX Tools

Need tools? Head over to the ONYX Tools Post for all the essential gear you’ll need to service, repair, and modify your ONYX!

Know Your Torque

ONYX Motors Official Parts

Always hit up the Official ONYX Motors Stuff page first-it’s packed with more ONYX parts than ever, now with huge price drops!! Pro tip: use Visualping to get the drop on when parts are back in stock. Stay ahead of the game!

Tires & Larger Fork Stabilizer

The tire links and larger front fork stabilizer are available in a dedicated post with additional useful information.

Battery Lead Fuse

This is the fuse on your battery lead wire that connects to your battery. Keep a spare taped underneath your wood battery cover.

Brake Pads

GPS Performance Meter

Speed Gun

Water Sprayer

Keep your ONYX looking fresh by spraying it down after winter rides, muddy adventures, or off-road trips. Rinsing with clean water helps attract and wash away dirty water, removing street grime, salt, and dirt that can lead to rust.

Timer Outlet with Remote Control

While you can leave your charger plugged in overnight, it’s always a good idea to use an outlet timer-just in case you forget!

Batteries

Battery Wrap

Wedge Frame Bag by GreyFit

Seat Cover by GreyFit

Fenders Front and Rear by Z-Creations

Battery Cover by Z-Creations

Steel Side Panels by Riggs Engineering

Full Throttle Kit by dedcell.com

FarDriver Controller Harness by dedcell.com

Kelly Controller Harness by dedcell.com

Stock USB Port Fix by dedcell.com

Helmet Buckle Quick Release

Helmets by Torc

Helmets Lenses by Torc

For both daytime and nighttime riding, I recommend choosing the “light smoke” lens for the Torc Newport T1 and Torc T28 helmets.

Helmet Brake Light

Statorade

Hubsinks

Battery Cover Lock and Key

Disc Brake Lock

Chain Lock

Front Body Plug

Battery Strap

Tow Strap

Brake Fluid DOT 3

Brake Levers

Brake Front Assembly

Brake Front Caliper

Brake Rear Caliper

Brake Rear Adapter

Front Brake Line

The stock front hydaulic brake line is 32" (81cm) long but you can use slightly longer lines like 35" (90cm). If you are installing taller handle abrs you might want 47" (120cm) longer line.

Brake Front Disc

Brake Rear Disc Screws

Brake Rear Caliper Adpater

Tire Preasure Monitoring System

Front Fork Stabilizer

Clears 3.5 Inch Front Tires

Front Fork Washer

This 24mm, 2mm thick washer is the fix for the 2023 ONYX RCR models with front forks missing the internal spacer-this washer serves as a perfect substitute.

Front Fork Oil

Front Tire Bushings Spacer

Front Suspension

The ONYX lower headtube headset measures 25mm in diameter, while the fork diameter is 30mm. Most headtubes are 26mm, so be sure to get the 25mm version.

For the standard height ONYX RCR and CTY2, the rear suspension height ranges from 340mm to 360mm. For the shorty height RCR/CTY2, the rear suspension height is between 290mm and 320mm.

Omega Rear Shocks At Treatland

Omega Rear Shocks At 50Factory

FarDriver Controller 680 Series

Fardriver Controller 530 Series

Charger Enhancer

The Charger Enhancer upgrades any ONYX charger with adjustable charge levels, variable amps, auto-cutoff, and more, turning it into a smart charger.

ONYX RCR Stock Chargers

ONYX RCR Charger

ONYX CTY2 Charger

ONYX CTY Charger

Battery Charge XLR to XT60 Adapters

When using a XLR to XT60 charge adapter, always adhere to the maximum amperage rating of the weakest connection. For XLR connector adapters, this is 10 amps,

XLR Charge Connector

This 16-amp Neutrik-branded XLR connector serves as a replacement for both the battery discharge port and the charger.

XLR Extension Cable

Feed this XLR extension through the right-hand side hole at the top of the ONYX RCR’s body to make your charge port accessible outside the bike. This setup protects your battery’s original XLR connector from exposure to the elements.

Battery Carry Cart

Battery Carry Wagon

Zello Push to Talk Button

Apple AirTag

Apple AirTag Holders

Tire Preasure Monitoring System

Action Camera

The Insta360 GO 3S can be mounted inside the helmet, on the helmet chin, or on the chest. The Insta360 X4 is a full 360 camera that can be placed anywhere on the ONYX, including the handlebar. The Insta360 Ace Pro follows the traditional action camera format, making it ideal for mounting anywhere on yourself or the ONYX. Additionally, a new release called the “Insta360 Ace Pro 2” offers improved optics.

Action Camera Mount

Folding Stool Chair

Headlight

Fog Light

Turn Signal

Side Panel LED

Side Panel Screws

Side Panel Screws - Silver M5 x 20mm - #1 Side Panel Screws - Black M5 x 20mm - #2

Footrest Peg Conversion Kit

Footrest Peg Conversion Kit

Weather Cover

Weather Cover With Reflective Strips And Lock-Hole

Chain Tensioner

Chain

Freewheel

Pegs

Install foot pegs directly below the rear suspension. You’ll find a hole located just beneath the lower rear suspension mount for this purpose.

Phone Mount

This handlebar phone mount can be positioned at the center of the handlebar. To install it, you’ll need to remove the four handlebar mount screws. Cut the thick spacer in half and place it on the top half of the mount clamp. Then, cut the thin spacer in half and use it on the bottom half of the mount clamp. If necessary, place the other half of the thin spacer on the top of the mount clamp along with the thick spacer. Be sure to apply Thread Locker to both the mount screws and the four handlebar screws for a secure fit.

Handlebar Screws

Handlebar Display Rubber Clamp

Handlebar Display Rubber Clamp Screw Nut Set

Handlebar

72V DC To DC Converter

USB Charger

USB Charging Cables

Stock Motor QS 250

Rear Axle Nut

Rear Axle Self-Locking Washer Wedge

Front Axle

Domino Throttle

Domino Throttle Power and Mode Switch

Power and Mode Switch

Handlebar Left Switch Assembly

Rear View Mirror

Brake Light

Throttle Stock

Pedal Crank Shaft

Pedals

Pedals Quick Release

Pedal Arms and Cotter Pin

Battery and Phase Wire Terminal

Alarm and Key Fobs

Seat Mount Nuts

Horn

Kickstand

The stock kickstand bolt is 8mm with a 1.5mm pitch. Some aftermarket kickstands have a larger 9mm hole, which means you’ll need to drill the mount hole to 9mm for a proper fit. Alternatively, you can install a nut with thread lock to secure it.

Kickstand Spring

Display

Trailer Hitch Carrier

Thermal Camera

ONYX RCR Stock Kelly Controller

Purchase options:

  • 72v
  • 300a
  • Waterproof
  • Field Weakening
  • Hall Sensor
  • Waterproof Connector
  • Bluetooth Adapter

Kelly Controller USB to RS-232 Cable

Kelly Controller RS232 to JST Adapter

Regen Handlebar Button

Variable Regen Signal Relay Module 12V

Variable Regen Brake Lever with Analog Output

Thumb Throttle

Handlebar Voltage Display

Saddle Bag Brackets