This post covers QS aftermarket hub motor options for the ONYX platform, including both 72V ONYX and 80V ONYX builds.
It focuses on:
- Selecting the correct QS motor configuration
- Understanding specifications, fitment, and compatibility
- Key differences between QS 205, 260, and 273 motors
- Performance expectations across 72V and 80V systems
- Matching motors with appropriate controllers and batteries
- Identifying common motor and hall sensor-related faults
The post begins with a quick upgrade overview, then expands into detailed specifications, configuration data, and platform-specific considerations.
Availability and Recorded Information
Product prices, models, stock, supplier contacts, and software links can change. Listed figures and observations retain their original context; confirm the exact item, current availability, and compatibility with the provider before ordering or booking service.
ONYX Motor Upgrade Cheat Sheet
ONYX bikes commonly use QS hub motors. These are the three most practical upgrade paths.
| Motor | Best Use | Notes |
|---|---|---|
| QS 205 V3Ti 150mm | Balanced street build | Direct fit, lightest |
| QS 260 V4 155mm | Performance street | More torque, slightly wider dropout |
| QS 260 V4 200mm | Performance street | More torque, slightly wider dropout |
| QS 273 V4 200mm | High-power builds | Heaviest, strongest axle, wider dropout |
Typical configurations:
- QS 205 V3Ti, 150 mm dropout, 8 AWG
- QS 260 V4, 155 mm dropout, 6 AWG
- QS 260 V4, 200 mm dropout, 6 AWG
- QS 273 V4, 200 mm dropout, 6 AWG
Buy the correct version the first time and avoid older revisions.
QS Motor Evolution
| Motor | Latest Version | Shaft | Dropout | Phase Wire | Amps @72V | Torque |
|---|---|---|---|---|---|---|
| 205 | V3Ti | 10mm | 150mm | 8 AWG | 150A | 190 Nm |
| 260 | V4 | 12mm | 155mm | 6 AWG | 240A | 220 Nm |
| 260 | V4 | 12mm | 200mm | 6 AWG | 240A | 220 Nm |
| 273 | V4 | 14mm | 200mm | 6 AWG | 300A | 310 Nm |
QS Motor Version History
QS 205 Motor
| Year | Version | Shaft | Dropout | Magnet | AWG | Volt | Amps | Nm | IP |
|---|---|---|---|---|---|---|---|---|---|
| 2015 | 205 V1 | 9mm | 135mm | 35mm | 10 | 72 | 60 | 100 | 54 |
| 2017 | 205 V2 | 10mm | 150mm | 50mm | 8 | 72 | 90 | 140 | 54 |
| 2018 | 205 V3 | 10mm | 150mm | 50mm | 8 | 72 | 110 | 170 | 54 |
| 2022 | 205 V3Ti | 10mm | 150mm | 50mm | 8 | 72 | 150 | 190 | 65 |
QS 260 Motor
| Year | Version | Shaft | Dropout | Magnet | AWG | Volt | Amps | Nm | IP |
|---|---|---|---|---|---|---|---|---|---|
| 2024 | 260 V4 | 12mm | 155mm | 40mm | 6 | 72 | 240 | 220 | 65 |
| 2026 | 260 V4 | 12mm | 200mm | 40mm | 6 | 72 | 240 | 220 | 65 |
QS 273 Motor
| Year | Version | Shaft | Dropout | Magnet | AWG | Volt | Amps | Nm | IP |
|---|---|---|---|---|---|---|---|---|---|
| 2020 | 273 V3 | 14mm | 200mm | 50mm | 6 | 72 | 200 | 260 | 54 |
| 2025 | 273 V4 | 14mm | 200mm | 50mm | 6 | 72 | 300 | 310 | 65 |
CTY2 205 V3Ti Motor
The CTY2 version of the 205 V3Ti motor features three 8mm phase wire service ports, along with hall sensor and temperature sensor service ports. It is roughly 60% as powerful as the RCR V3Ti motor.
| Year | Version | Shaft | Dropout | Magnet | AWG | Volt | Amps | Nm | IP |
|---|---|---|---|---|---|---|---|---|---|
| 2022 | 205 V3Ti CTY2 | 10mm | 150mm | 40mm | 8 | 60 | 90 | 120 | 65 |
Magnet Height and Torque
Magnet height directly affects torque output and heat tolerance.
The “h” designation refers to magnet height in millimeters. Taller magnets create stronger magnetic fields, increasing torque and thermal capacity, but also increase weight and cost.
| Motor | Magnet Sizes |
|---|---|
| 205 | 50H, 55H |
| 260 | 40H, 45H |
| 273 | 40H, 45H, 50H |
Motor Size Scaling: Torque, Current, and Thermal Capacity
QS motors follow a direct scaling relationship where physical size increases torque capability, current handling, and thermal performance together. These characteristics scale with stator size and overall motor mass.
QS 205 V3Ti (150 mm)
Smaller stator and lower thermal mass. Heats up faster under sustained load and reaches thermal limits sooner. Lower continuous current capability compared to larger motors.QS 260 V4 (155 mm)
Larger stator and increased thermal mass. Supports higher continuous phase current with improved heat dissipation. Sustains load longer before reaching thermal limits.QS 273 V4 (200 mm)
Largest stator and highest thermal mass. Designed for very high phase current and sustained power. Absorbs and dissipates heat more effectively than the 205 and 260, allowing significantly higher continuous performance.
As motor size increases:
- Torque output increases
- Allowable continuous current increases
- Thermal capacity improves (slower heat saturation and better dissipation)
This scaling also requires:
- wider dropouts
- thicker axles
- larger phase wires
These are linked characteristics, not independent changes, and together define the motor’s real performance limits.
Winding Recommendation
Use 4T windings for most ONYX builds.
Higher RPM windings:
- Increase motor heat
- Reduce low-speed torque
- Shorten motor lifespan
QS 205 Motor Winding List
| Winding | RPM | Voltage | kV |
|---|---|---|---|
| 5T | 650 | 72 | 9.03 |
| 4T+ | 765 | 72 | 10.63 |
| 4T | 820 | 72 | 11.39 |
| 4T- | 956 | 72 | 13.28 |
| 3T+ | 1030 | 72 | 14.31 |
| 3T | 1175 | 72 | 16.32 |
| 3T- | 1275 | 72 | 17.71 |
Correct Motor Configurations
| Motor | Dropout | Wire | Magnet | Rim |
|---|---|---|---|---|
| 205 V3Ti | 150mm | 8 AWG | 50H | 17" x 1.8" |
| 260 V4 | 155mm | 6 AWG | 40H | 18" x 2.15" |
| 273 V4 | 200mm | 6 AWG | 50H | 18" x 2.15" |
ONYX Motor Specifications
ONYX RCR Stock QS 205 Motor
- Voltage: 48V to 144V
- Maximum Temprature: 180°C (356°F)
- Amperage: 150a at 72v
- Magnet Height: 50mm
- Torque: 182nm
- Motor Weight: 31lbs
- Recomended Rim Width: 1.6", 1.8"
- Recomended Tire Width: 2.75", 3.0"
- Drop-out: 150mm
- Disc brake PCD3 / Disc M8 80mm x 58mm
- Pole Pairs: 16
- Efficency: 85% to 92%
- IP Rating: IP65
- Thermic Probe: KTY83-122
- Phase Wire: 10 AWG
- Hall Angle: 120 Degree
- Dual Halls As Spare With Waterproof Connectors
- Phase Harness Insulation Wire Color: Black or Orange
ONYX RCR QS 205 55H Wider Magnet Motor
- Voltage: 48V to 144V
- Maximum Temperature: 180°C (356°F)
- Amperage: 175a at 72v
- Torque: 200nm
- Magnet Height: 55mm
- Motor Weight: 41lbs
- Recomended Rim Width: 1.6", 1.8"
- Recomended Rim Height: 17", 18"
- Recomended Tire Width: 2.75", 3.0", 3.5"
- Drop-out: 155mm, 175mm, 200mm
- Disc brake PCD3 / Disc M8 80mm x 58mm
- Pole Pairs: 16
- Efficency: 85% to 92%
- IP Rating: IP66
- Thermic Probe: KTY83-122
- Phase Wire: 8 AWG
- Hall Angle: 120 Degree
- Dual Halls As Spare With Waterproof Connectors
ONYX RCR QS 260 Motor
- Voltage: 48V to 144V
- Maximum Temperature: 180°C (356°F)
- Amperage: 260a at 72v
- Torque: 220nm
- Magnet Height: 40mm
- Motor Weight: 39lbs
- Recomended Rim Width: 1.8", 2.1", 2.5"
- Recomended Rim Height: 17", 18"
- Recomended Tire Width: 3.0", 3.5", 4.0"
- Drop-out: 155mm, 175mm, 200mm
- Disc brake PCD3 / Disc M8 80mm x 58mm
- Pole Pairs: 16
- Efficency: 85% to 92%
- IP Rating: IP66
- Thermic Probe: KTY83-122
- Phase Wire: 6 AWG
- Hall Angle: 120 Degree
- Dual Halls As Spare With Waterproof Connectors
ONYX RCR QS 273 Motor
- Voltage: 48V to 144V
- Max No-load RPM: 1339 RPM, 1400 RPM
- Maximum Temperature: 180°C (356°F)
- Amperage: 300a at 72v
- Torque: 200nm, 210nm, 266nm, 300nm
- Magnet Height: 40mm, 45mm, 50mm
- Motor Weight: 48lbs
- Recomended Rim Width: 1.8", 2.1", 2.5"
- Recomended Rim Height: 17", 18"
- Recomended Tire Width: 3.0", 3.5", 4.0"
- Recomended Spoke Diameter: 3.2mm, 4.2mm
- Drop-out: 175mm, 200mm
- Disc brake PCD3 / Disc M8 80mm x 58mm
- Pole Pairs: 16
- Efficency: 85% to 92%
- IP Rating: IP54, IP66
- Thermic Probe: KTY83-122
- Phase Wire: 6 AWG
- Hall Angle: 120 Degree
- Dual Halls As Spare With Waterproof Connectors
72V ONYX Motor Considerations
The QS 205 V3Ti is the stock motor on the 72V ONYX RCR, fitting the original 150 mm dropout while keeping unsprung weight relatively low. It provides a balanced combination of torque and efficiency for general street use, but its smaller stator and lower thermal mass mean it heats up more quickly under sustained high load compared to larger motors.
The QS 260 V4 increases stator width and thermal mass, allowing higher continuous phase current and improved heat dissipation under sustained load. Compared to the 205, it delivers a clear step up in torque output while also offering improved thermal stability due to its larger size, but typically requires 155 mm dropout spacing, along with potential frame spreading or custom spacers and torque arm solutions.
The QS 273 V4 uses a substantially larger stator and axle assembly, supporting very high phase current and sustained power levels well beyond the 205 and 260. Its significantly increased size provides the best thermal capacity of the three, allowing it to absorb and dissipate heat more effectively during prolonged high-power operation. It is intended for extreme high-power builds, commonly requiring 200 mm dropout spacing, reinforced torque arms, and introduces significantly higher unsprung mass that impacts handling.
Why the 150 mm QS 273 Is Not Recommended
Early 150 mm QS 273 motors gained popularity around 2020 but offer minimal real advantage over modern QS 205 and QS 260 motors on the RCR platform.
Real performance gains begin with the 155 mm V4 QS 260.
When evaluating motors, check for clones by inspecting:
- Copper winding quality
- Stator machining
- Winding consistency
72V Rear Swing Arm Compatibility
ONYX has discussed releasing a wider swingarm to support higher loads and larger tires.
Tire Compatibility
| Tire | 2.75" | 3" | 3.5" | 4" |
|---|---|---|---|---|
| Michelin Extra | ✓ | ✓ | ||
| Michelin Pilot 2 | ✓ | ✓ | ✓ | ✓ |
| Continental ContiStreet | ✓ | ✓ | ✓ | ✓ |
| Shinko 241 | ✓ | |||
| Shinko 244 | ✓ | ✓ |
Rim Compatibility
| 1.8" | 2.1" | 2.5" | 3" |
|---|---|---|---|
| ✓ | ✓ | ✓ | ✓ |
QS Motor Reference Images

Final Advice
Choose modern QS motor revisions, match them to the correct dropout and wiring configuration, and pair them with appropriate batteries and controllers.
A properly matched motor setup will keep your ONYX reliable, powerful, and ready to ride.
Motor Supply Notes - April 2026
These are the April 2026 supply notes; availability and planned hardware are historical, not a current ordering guarantee.
Larger Motors
Henry, Mathew, and I realized that instead of organizing a group buy, it made more sense to secure batches of larger motors for both the 72V and 80V platforms, which are already on the way. This simplifies everything on our end, including logistics, support, and the ability to provide clear instructions and documentation. Each motor will come paired with an extended swingarm plate. As these sell through, we will continue restocking, so availability will not be limited to a single run. We do not have final pricing yet.
We are working through that along with other items, and once that process is complete, we will release all the details. And just to confirm, the 72V platform motors are compatible with the CTY2.This also gives me the time to put together a proper blog post that breaks everything down. There is a lot to cover, including what these motors are capable of, where they fit, and what they are designed to do, so I want to make sure everything is clearly laid out.
The photo shows the three motor setups we went with:
- QS 260 laced to a 17" x 2.5" rim with spokes for the 72V
- QS 260 (200 mm) on a 17" x 3.5" mag rim, designed for 200 mm dropout on the 80V
- QS 273 (200 mm) on a 17" x 3.5" mag rim, also for 200 mm dropout on the 80V
Detailed Guides
