ONYX RCR Specifications#
Tires#
| Tires |
Answer |
| Tire Preassure |
32 to 35 PSI Front & Rear |
| Best Tires |
Michelin, Shinko, and Continental |
| Flat Tire |
Use thicker 2mm to 3mm tubes |
| Tire Sealants |
Causes tire imbalance and, being water-based, can lead to rim rust |
| Modes |
ECO 20mph, Normal 40mph, and Sports 60mph |
Battery#
| Battery |
Answer |
| Temprature |
Charge below 110°F, check BMS temps |
| Battery Storage |
Below 40°F, store battery indoors |
| Storage Voltage |
74v to 78v / Disconnect battery if unused for over a month |
| Optimal Voltage |
83v |
| ONYX 45Ah Amps |
Constant 100a / Boost 130a (8 min) / Peak 200a (3 sec) |
| ONYX 45Ah Mode Range |
Eco 120 miles / Normal / 70 miles / Sport 45 miles |
| Charge Connector |
XT60 or XT90 |
| Discharge Connector |
QS8 |
| Max Regen |
40a |
Controller#
| Controller |
Answer |
| Stock Tune |
Eco (750w) Normal (3kw) Sports (5kw) |
| Modified Tune |
Sports (20kw) |
| Stock Acceleration |
0-30mph in 4.0 seconds |
Temperatures#
| Temperatures |
Answer |
| Controller |
Max 212°F |
| Motor |
Max 302°F |
| Battery |
BMS Cut-off 140°F |
Weight#
| Weight |
Answer |
| RCR |
145 lbs |
| 23Ah Battery |
25 lbs |
| 38Ah Battery |
38 lbs |
| 41Ah Battery |
37 lbs |
| 45Ah Battery |
39 lbs |
| RCR |
145 lbs |
| Stock RCR 2 Riders |
Max 385 lbs |
| Modifed RCR 2 Riders |
Max 500 lbs |
| Rear Rack Capacity |
45 lbs |
Dimensions#
| Dimensions |
Answer |
| RCR |
67" Long x 40" Handlebar High x 27" Handlebar Wide |
| Seat |
19” Long x 7” Wide x 4” High / 2" Foam / 16" Seating |
| Seat Travel Adjusment |
3.2" |
| Standard Seat Height |
33" |
| Shorty Seat Height |
31.5" |
| Tire Diameter |
23" Front/Rear |
Parts#
| Parts |
Answer |
| Pedal Crank |
28T |
| Freewheel |
16T |
| Chain |
112 Links |
| Kickstand |
11" |
| Rims |
17" x 1.8" |
Suspension#
| Suspension |
Answer |
| Rear Suspension Standard |
350mm |
| Rear Suspension Shorty |
300mm |
Electrical#
For aftermarket accessories like a headlight, divide 75W by 12V to get 6.25A draw. The ONYX 12V DC converter outputs 10A, leaving 3.75A for other components. Upgrade to a 15A or 20A DC converter if needed-check the ONYX aftermarket parts post for options. Avoid exceeding 14A on a single 18 AWG copper wire.
| Electrical |
Answer |
| 12v DC Converter |
10a |
| 5v DC Converter |
1a |
| USB Charging |
1a to 1.2a |
| Brake Light |
1a |
| Brake Light Wire |
18 AWG |
| Headlight Ring |
1.2a |
| Headlight High Beam |
3.3a |
| Headlight Wire |
18 AWG |
| Main Harness |
18 AWG |
