This post is a practical ONYX reference for tools, consumables, chargers, wiring materials, replacement parts, and upgrade parts across 72V, 80V, and CTY platforms.
- tools for maintenance, wiring, brakes, suspension, wheel service, and fabrication
- replacement and upgrade parts for 72V, 80V, and CTY platforms
- batteries, chargers, connectors, workshop supplies, and common accessories
References
Know Your Torque
Batteries
FarDriver Controllers
Chargers
All four chargers work with EV charging stations. Verify 110V / 220V auto-switching in the manual and use a J1772-to-NEMA 5-20 240V passthrough adapter.
- 80V RCR - 2-20 Amp, 110V-220V
- 72V RCR - 2-8 Amp, 110V-220V
- 60V CTY2 - 5 Amp, 110V-220V
- 48V CTY - 6 Amp, 110V-220V
EV Station Adapter
This J1772 adapter passes full 240V through a NEMA 5-20. The ONYX RCR 72V 10A charger is not 240V compatible. The ONYX RCR 80V 10A charger is, with the red switch set to 220V.
- J1772 to NEMA 5-20 Adapter With 240V Pass Through
- 110V Socket Voltage Checker Up To 300V
- Outlet Timer with Remote Control
Hex & Hand Tools
Used for common ONYX maintenance such as side panels, brakes, suspension, controller access, and body hardware.
- Stubby 3mm Ball End Hex Wrench
- Metric Hex Key Allen Wrench Set
- Right Angle Screwdriver
- Ultra Low Profile Offset Screwdriver Set
- Rubber Mallet
- Damaged Screw Extractor Set
Socket, Torque & Wrenches
Essential for axle removal, seat removal, drivetrain work, and tightening hardware to proper torque specs.
- Flexible Socket Extension 3/8
- 10mm Long Socket
- 1/2 inch Breaker Bar
- 1/2 inch Deep Socket
- Thin Open End Wrench Set Metric
Torque Wrenches
Using the correct torque prevents stripped hardware and component damage.
- Torque Wrench - Manual, 3/8, 1/2
- Torque Wrench - Digital, 1/2
- Torque Wrench - Digital, 3/8
- Digital Torque Adapter - Digital, 3/8
Socket Sets & Adapters
Axle Wrenches
Front axle: 19mm — 45 Nm
Rear axle: 24mm — 80 Nm
Electrical Tools
Required for wiring work such as FarDriver installs, harness repairs, controller diagnostics, and connector service.
- Motor Controller Tester
- U-Shaped 16-26 AWG SN-48B Wire Crimping Tool
- Self-Adjusting 10-24 AWG Wire Stripper
- Harness Terminal Pin Removal Tool
Soldering Tools
Useful for connector repairs, hall sensor replacements, and electrical modifications.
- Soldering Iron - Electric
- Soldering Iron - Butane
- Soldering Iron Butane Gas 11X
- Magnetic Third Hand Soldering Tool
- Rosin Core Solder Wire - 1 lb
- Rosin Core Solder Wire - 100g
- Brass Ball Solder Tip Cleaning Wire
- Soldering Pliers
Wiring, Connectors & Cables
Wiring Supplies
- Electrical Wire Loom Tape
- Shrink Tubing - 3:1 Adhesive Lined
- Expandable Braided Sleeving
- Dual Temperature Heat Gun
Charge Connectors
Discharge Connectors
- SB50 Discharge Connector / Male and Female
- QS8 Discharge Connector / Male and Female
- QS9-L Discharge Connector / Male and Female
- QSP10P-L Discharge Connector / Male and Female
- QS12-M Discharge Connector / Male and Female
Motor Wiring
Chemicals, Adhesives & Cleaners
Mechanical Service
Electrical Protection
- Contact Cleaner
- Kapton Electrical Tape
- Liquid Electric Tape
- Clear Electronic Grade Silicone
- Caulking Gun For Electronic Grade Silicone
Bonding
Cleaning, Surface Care & Rust Prevention
- Steel Polish
- Brake Parts Cleaner
- Salt Off Spray
- Ceramic Coating Spray
- Bug Remover
- Clear Topcoat Spray
- Waterless Wash
- Microfiber Towel
- Mothers Aluminum Polish
- Autosol Metal Polish
- Ceramic Coating
- Aluminum Sealant
- Beeswax Wood Polish
- Wood Sealer
- Steel Wool
- Chrome Protectant
- Rust Prevention Oil
- Motorbike Cleaning Spray
- Pressure Sprayer - 1 Gallon
- Pressure Sprayer - 1/4 Gallon
- Short Handle Brush
- Microfiber Wash Mitt
Brakes
Suspension, Frame & Chassis
- Lift Stand Jack
- Hydraulic Scissor Lift
- Rear Shock Hook Spanner Wrench Tool - 55mm to 62mm
- Rear Shock Hook Spanner Wrench Tool - 45mm to 52mm
- Headset Bearing Removal Tool
Tires & Wheels
Tire Tools
Spoke Tools
Tire Buy Links
Tires measured in inches have fixed width and sidewall height. Metric sizes use an aspect ratio, so overall width and sidewall height vary by tire model.
| Link | Rim | Size | Tire |
|---|---|---|---|
| Buy | 17" | 80/90 | Pirelli Diablo |
| Buy | 17" | 80/90 | Pirelli Angel |
| Buy | 17" | 2.75" | Michelin Extra |
| Buy | 17" | 70/90 | Michelin Extra |
| Buy | 17" | 80/90 | Michelin Extra |
| Buy | 17" | 90/80 | Michelin Pilot 2 |
| Buy | 17" | 100/80 | Michelin Pilot 2 |
| Buy | 17" | 2.75" | Shinko 241 |
| Buy | 17" | 3.0" | Shinko 241 |
| Buy | 17" | 3.0" | Shinko 244 |
| Buy | 17" | 2.75" | Continental ContiStreet |
| Buy | 17" | 3.0" | Continental ContiStreet |
| Buy | 17" | 70/90 | Continental ContiStreet |
| Buy | 17" | 80/90 | Continental ContiStreet |
| Buy | 17" | 90/80 | Continental ContiStreet |
| Buy | 17" | 100/90 | Continental ContiStreet |
| Buy | 18" | 2.75" | Michelin Extra |
| Buy | 18" | 3.0" | Michelin Extra |
| Buy | 18" | 90/90 | Michelin Extra |
| Buy | 18" | 2.75" | Continental ContiStreet |
| Buy | 18" | 3.0" | Continental ContiStreet |
| Buy | 18" | 90/90 | Continental ContiStreet |
| Buy | 18" | 100/80 | Continental ContiStreet |
| Buy | 18" | 100/90 | Continental ContiStreet |
| Buy | 18" | 3.0" | Shinko 244 |
| Buy | 18" | 3.5" | Shinko 244 |
Tire Tube Buy Links
Tube listings are grouped by tire diameter, thickness, and compatible tire sizes. Thicker tubes improve puncture resistance but are harder to install.
| Link | Rim | Thick | Size |
|---|---|---|---|
| Buy | 17" | 3mm | 2.75" |
| Buy | 17" | 3mm | 3.0" |
| Buy | 17" | 3mm | 70/100 |
| Buy | 17" | 3mm | 80/90 |
| Buy | 17" | 2mm | 2.75" |
| Buy | 17" | 2mm | 3.0" |
| Buy | 17" | 2mm | 70/100 |
| Buy | 17" | 2mm | 80/90 |
| Buy | 17" | 2mm | 3.5" |
| Buy | 17" | 2mm | 4.0" |
| Buy | 17" | 2mm | 90/80 |
| Buy | 17" | 2mm | 90/90 |
| Buy | 17" | 2mm | 100/80 |
| Buy | 17" | 2mm | 110/100 |
| Buy | 18" | 2mm | 3.5" |
| Buy | 18" | 2mm | 4.0" |
| Buy | 18" | 2mm | 90/80 |
| Buy | 18" | 2mm | 90/90 |
| Buy | 18" | 2mm | 100/80 |
| Buy | 18" | 2mm | 110/100 |
| Buy | 18" | 3mm | 4.0" |
| Buy | 18" | 3mm | 90/80 |
| Buy | 18" | 3mm | 90/90 |
| Buy | 18" | 3mm | 100/80 |
| Buy | 18" | 3mm | 110/100 |
| Buy | 18" | 1mm | 2.75" |
| Buy | 18" | 1mm | 3.0" |
Motor & Drivetrain
- Motor Axle Strike Plate
- Hall Sensor 413F #1
- Hall Sensor 413F #2
- Hall Sensor 413F #3
- Freewheel Remover Tool
80V & 72V Parts
Cooling
Security
Utility and Hardware
- 80V & 72V - Foldable Foot Peg
- 80V & 72V - Battery Cover Lock and Key
- 80V & 72V - Velcro Battery Strap > 1 Inch x 30 Inch
- 80V & 72V - Velcro Battery Strap > 2 Inch x 30 Inch
- 80V & 72V - Trailer Hitch Carrier Mount Rack With Loading Ramp
USB Charging
Brakes, Lighting, and Signals
- 80V & 72V - Brake Fluid DOT 4
- 80V & 72V - Tail Light > Rectangle LED Brake
- 80V & 72V - Tail Light > Stealth LED Brake
- 80V & 72V - Tail Light > Rounded LED Brake
- 80V & 72V - 4 Piece Flowing Turn Signal
- 80V & 72V - 4 Piece Mini Turn Signal
- 80V & 72V - Flexible Strip Turn Signal
Tires, Drivetrain, and Controls
- 80V & 72V - Tire Pressure Monitoring System
- 80V & 72V - Dark Bike Chain
- 80V & 72V - Silver Bike Chain
- 80V & 72V - Chain Tensioner
- 80V & 72V - Lightweight Pedals
- 80V & 72V - Seat Mount Nuts
Horn
80V Parts
Brakes and Hardware
- 80V - Brake Pads > Front and Rear #1
- 80V - Brake Pads > Front and Rear #2
- 80V - Rear Axle Locking Washer Wedge > M24
- 80V - Locking Washer Kit
- 80V - Adjustable Brake Levers > Dual Disk
Cockpit and Accessories
- 80V - Windshield with Mount Bracket
- 80V - Handlebar Barrel Bag
- 80V - Ferrite Ring Cores
- 80V - Tubeless Tire Repair Plug Kit
- 80V - Mini Bike Tire Pump
- 80V - Crank Extractor Bottom Bracket Remover
- 80V - Mirror Extenders with M10 or M8 Mounting
- 80V - Camera Mirror Extension Mount
- 80V - Handlebar Rearview Mirror Extension Bracket
72V Parts
Battery
Controller
Controller Purchase Options
After you place your order for the Kelly controller, reply directly to the order confirmation email from @kellycontroller.com and let them know the controller is for an ONYX RCR so they include the correct alarm connectors.
- 72V
- 300A or 400A
- Waterproof
- Field Weakening
- Hall Sensor
- Waterproof Connector
- Bluetooth Android Adapter or USB PC Cable
Controller Adapters
- 72V - Kelly Controller USB and Bluetooth Adapter
- 72V - Kelly Controller USB to RS232 Cable
- 72V - Kelly Controller RS232 to JST Adapter
Stock Throttle
Throttle & Switches
Left Handlebar Controls
Handlebar
Handlebar Screws
- 72V - Silver Handlebar Riser Top Clamp Screws > M8 1.25 x 25mm
- 72V - Black Handlebar Riser Top Clamp Screws > M8 1.25 x 25mm
Handlebar Display Rubber Clamp
XLR Connector
- 72V - XLR Battery Connector Female
- 72V - XLR Charger Connector Male
- 72V - XLR Extension Cable
- 72V - Female XLR to Male XT60 Adapter
DC Converter
Brake Pads
Brake Levers
- 72V - Rear Left Brake Lever > v1.5
- 72V - Rear Left Brake Lever > v1.0
- 72V - Front Right Brake Lever > v1.0, v1.2, v1.5
Front Brake Assembly
Rear Brake Caliper
Front Brake Line
Rear Brake Disc Screws
Front Suspension
- 72V - Front Suspension Forks
- 72V - Lower Headset Triple Tree with Bearings
- 72V - Taller Front Fork Stabilizer
- 72V - Front Fork Washer
Front Fork Suspension Oil
Rear Suspension Shocks
- 72V - Omega Rear Shocks at Treatland > 360mm
- 72V - Omega Rear Shocks at Treatland > 340mm
- 72V - Omega Rear Shocks at 50Factory > 360mm
- 72V - Omega Rear Shocks at 50Factory > 340mm
- 72V - Omega Rear Shocks at 50Factory > 320mm
- 72V - Omega Rear Shocks at 50Factory > 300mm
Freewheel
Front Axle
Pedal Crank Shaft
- 72V - Pedal Crank Shaft - Chrome > 16mm x 213mm OS 8mm 24T
- 72V - Pedal Crank Shaft - Black > 16mm x 213mm OS 8mm 24T
- 72V - Pedal Crank Bushing > 16mm x 20mm x 12mm FD 24mm FT 2mm
Note: The plastic pedal crank shaft has a 20 mm outer diameter, while the metal version should have a 19 mm outer diameter.
Pedal Arms and Cotter Pin
Peg Conversion Kit
Rear View Mirror
Phone Mount
Headlight
- 72V - R5.75 LED Headlight with Turn Signals
- 72V - 5.75 inch LED Headlight DRL
- 72V - 5.75 Headlight Bracket Shell
Fog Light
Side Panel LED
Side Panel Screws
Wedge Frame Bag by GreyFit
Seat Cover by GreyFit
Fenders
- 72V - 3D Printed Full Front Fender > Bobber
- 72V - 3D Printed Full Front Fender > Touring
- 72V - 3D Printed Full Rear Fender