80v

80V Firmware 2.0 features, published riding-mode speed caps, temperature monitoring, dashboard changes, and installation considerations.

Understanding ONYX motor temperature limits, neodymium magnet grades, thermal throttling, and how different cooling methods affect sustained performance.

Explains thermal capacity, magnet specifications, operating temperatures, torque, RPM, and ONYX RCR compatibility for Sotion H02/H16, QS260, and QS273 motors.

A practical guide to owning and riding an ONYX RCR in New York City, including NYPD traffic stops, vehicle classification, registration, insurance, ownership documentation, and community experience.

How acceleration, controller tuning, and riding behavior contribute to overheating, thermal throttling, and range loss on 72V and 80V ONYX RCRs.

How to evaluate a used ONYX before buying, including listings, seller claims, ownership, battery health, wiring, modifications, performance builds, pricing, and test rides.

Hydraulic brake bleeding, DOT-fluid compatibility, tools, platform distinctions, and completion checks for ONYX brakes.

J1772 EV-station charging compatibility for ONYX RCR 72V and 80V, including charger input ratings and adapter limits.

ONYX RCR battery energy, real-world range observations, riding conditions, and repeatable efficiency testing.

Reference brake-fluid guidance, bleeding methods, and 80V brake-service considerations.

Reference dimensions, materials, load figures, electrical ranges, and hardware specifications for ONYX 80V bikes.

Reference motor configuration, cable routing, wheel format, and specifications for the ONYX 80V.

A detailed look at Cruise Tune and Thrill Tune on the ONYX RCR 80V, including real-world riding impressions, thermal performance, and the New Normal firmware.

How to check component water-resistance claims and read IP codes for ONYX 80V hardware.

Airflow, material, and heat-transfer considerations for wheel covers on the ONYX 80V hub motor.

Why a removed ONYX 80V tubeless tire may not inflate and what bead sealing changes.

Pack and cell voltage references documented for the ONYX 80V 45Ah battery.

Recorded dimensions, materials, electrical ranges, and hardware specifications for the 72V ONYX.

Hydraulic brake symptoms, inspection checks, pad condition, and diagnosis for ONYX 80V bikes.

Real-world testing of ONYX 80V Thrill Mode and Cruise Mode firmware during extended riding and steep climbs in Portland.

Breaks down the ONYX 80V controller firmware update, including throttle mapping changes, ride modes, and display visibility improvements.

Explains how heat is generated and managed in the ONYX 80V motor, including regenerative braking, stator heat transfer, wheel cooling, airflow impacts, and real-world performance conditions.

Explains how voltage, current, controllers, and components translate into real-world performance on ONYX platforms from stock to 30kW+ builds.

Explains how to repair ONYX 80V tubeless tires after punctures, including plug repairs, when removal is required, and common failure scenarios.

ONYX RCR 80V platform features, chassis, display, brakes, tires, battery, and rider-facing system changes.

Overview of the Biltwell 100 desert race and ONYX 80V platform performance in extreme off road conditions.

SuperPower BMS monitoring, cell readings, app connection, and protection behavior for ONYX 80V 45Ah batteries.

Explains how SuperPower BMS behaves, is configured, and operates on ONYX 72V 45Ah battery systems under real-world load conditions.

Documents ONYX 80V tire sizing, rim characteristics, fitment limits, pressure behavior, and tubeless repair considerations.

ONYX 72V and 80V parts, accessories, workshop tools, and service supplies in one place.

Technical examination of ONYX launch behavior, including acceleration dynamics, rider input, system load, and structured preparation for consistent high-performance runs.

Defines inspection, diagnostic, and maintenance procedures for ONYX braking systems, including hardware differences between 72V, CTY2, and 80V models, fluid compatibility, bleeding methods, pad behavior, and regenerative braking interaction.

Defines validated ONYX FarDriver JAWS MODE performance builds, including supported controllers, motors, batteries, fitment limits, installation baseline, and high-voltage system behavior.

QS motor choices, 200 mm mounting considerations, and supporting-system requirements for ONYX 80V builds.

Details the correct brake pad bedding procedure for ONYX 72V and 80V bikes to improve braking feel and prevent rotor glazing.

Enclosure, mounting, connector, and charger checks before ordering a replacement battery for an ONYX 80V.

Explains how the ONYX 12V electrical system works and where to safely connect accessories using the factory wiring harness.

Details the installation of the larger MOKE front brake caliper on the ONYX 80V, including compatibility, torque specifications, and bleeding procedure.

Home battery charging, compatible chargers, charge phases, balancing, and temperature practices for ONYX RCR 72V and 80V.

Explains the ONYX electrical architecture including high-voltage drivetrain, 12V accessory system, wiring layout, and power distribution.

Explains ONYX platform differences including 72V, 80V, and CTY models, along with system design, specifications, and real-world behavior.

Explains how motor heat develops on ONYX bikes and how cooling upgrades such as Statorade and Hubsinks affect temperature and sustained performance.

Introduces the fundamentals of owning and riding an ONYX 72V or 80V, including first rides, riding posture, daily use habits, and platform dimensions.

QS motor upgrade choices and fitment references for CTY2 and 72V ONYX builds.

Examines the design and operating characteristics of the ONYX 80V 45Ah battery, including voltage behavior, BMS monitoring, connectors, charging methods, and thermal limits.

Explains how damage occurs on cast aluminum 80V ONYX rims and when repair is possible versus when replacement is required.

Provides quick answers to common ONYX 72V and 80V ownership questions covering riding habits, battery care, charging compatibility, security, and accessory wiring.

Describes ONYX 72V and 80V key alarm fob functions, including button inputs, standby behavior, battery replacement, and system control

Covers ONYX BMS app behavior across 72V and 80V 45Ah systems and 41Ah systems, including app compatibility, voltage interpretation, connection behavior, read-only versus configurable differences, diagnostic limitations, and real-world interpretation of BMS data.